BlackKite-RTU is an affordable and expandable remote monitoring system supporting M2M cloud platforms via HTTP and MQTT protocols. It features rich set of IO and serial interface to acquire, monitor and control remote field devices at its best.

Device Highlights

Features

  • Supports cloud-ready HTTP/MQTT device protocols.

  • IO expansion with optional ModBus Interface.

  • Configurable data transmission interval, starting from 30 Sec,

  • Highly configurable TAG based parameter selection to reduce GPRS traffic

  • Configurable Device generated SMS alerts for IO state change

  • Internal FLASH memory to store 24 hours of data during GPRS outage

  • Two level authentication for remote device access (admin & manager)

  • Optional GPS support for location tracking

Interfaces

  • Dual band GSM/GPRS for connectivity

  • Status LEDs useful for device installation and troubleshooting

  • Digital and analog inputs to remotely monitor field sensors

  • Digital outputs to remotely control devices

  • Built-in battery for failsafe operation (~4 Hours)

  • Serial interface for extended sensors connectivity

Specification

GPRS

  • Frequency band: 900/1800 MHz

  • GPRS Class 10, Mobile station Class B

  • R&TTE & CE compliant

  • Sensitivity: -108dBm @ 900 MHz -107dBm @ 1800Hz

  • Antenna: Internal

GPS (Optional)

  • GPS engine: 48 Channels SiRF star IV

  • Positioning Accuracy: < 2.5m CEP

  • Sensitivity: -163dBm Tracking -160dBm Navigation

  • TTFF: < 1s when hot and < 35s from cold (outdoors)

  • Antenna: Internal, with high gain

Parameters

Parameter Count

Digital Inputs

6

9 - 36V

Digital Outputs

4

250mA

Analog Inputs

2

0 - 30V

I/O Expansion

1

RS232 / 485

Downloads